Custom Fit Roof Rack Kit With RLTP | RRVA-FK1 | RRVA137B

Video Transcript for Rhino-Rack Vortex Aero Crossbars Review

Hey guys. It's Randy here at etrailer.com. Today we're doing a demo on the Rhino Rack Vortex Aero Crossbars. These are aluminum aero-shaped crossbar, of course they're designed to work with your Rhino Rack fit kit or leg kit, those are going to be sold separate.As you can see here, this is going to give us a spot on our roof to clear up a lot of space inside our vehicle. We've got a bike rack attached here, simply comes down, straps right around it. Gives us a excellent way to get that transported if we don't want something hanging off the back of our vehicle or if we don't want to take the whole thing apart and try to shove it inside.The aluminum crossbars are going to be lightweight and they're going to be very corrosion resistant, we're not going to have to worry about any kind of corrosion and eventually it dripping down on our vehicle.Now these crossbars are available in several different lengths, so depending on smaller vehicle, larger vehicle, we're going to have the right crossbar to match up with your vehicle.

They're also going to be available, not only the black that we see here, but silver. If you don't like the way a black roof rack looks, you can see with this silver side rails kind of blend in a little bit more if we had silver. That's kinda going to be up to you.The end cap here is something that they have provided a plastic core lock for. You just place this in here, rotate it to the unlock position, that's going to slide off for us. These can very easily be replaced with a locking core if you want a keyed lock to keep everything safe and secure, you can go that route also.Not only does our strip here keep our items from sliding side to side, but it's also going to protect the channel underneath from things running down in and for T-Slot type accessories this thing can be cut, put right back in.

This is going to do an excellent job of eliminating any noises that wind comes across. It won't get in that channel, we're not going to hear any of it.The bars are anodized fully through. Even on the inside here, if moisture happens to get in there and collect, we're not going to have to worry about corrosion. These give us excellent strength. You can see it's hollow, that helps it to stay nice and lightweight, but we have all the integral support here, gonna make 'em extremely, extremely durable.

They will really exceed well past that 165 pound weight rating that they offer, but it's not something you wanna do.The larger rectangle that we have here, that's where we slide in any of the foot pegs that we might need to match our particular vehicle.To ensure that you're accessories that you already have are going to fit or to ensure that you're getting the right accessories, just want to give you the dimensions real quick on our crossbars. From our front edge to our rear edge, we've got about 3-1/8 of an inch, then from the bottom up to the top, it's going to be an inch and 3/16. As long as your accessories are designed to fit that, which most of 'em on the market today are, won't have any issues.I really like the way this roof rack system looks. There are roof rack systems however, that will not overhang like this. Overhanging like what we have here, that gives you additional room for accessories and stuff.

Some people they'll prefer more of a factory look or more of a sleek look. In that case, I think I'd recommend one of the roof rack systems that come and end in the foot pack. We'd have our bar that comes over, but it's going to end right here in this area and be a little bit more sleek than what we have here with our overhanging aero bars from Rhino Rack.That's going to do it for our look at the Rhino Rack Vortex Aero Roof Rack Crossbars.